­

 

ecopoly new generation

ECOPOLY 2 Original Wood burning heater for worshop

 

 
 
 
 
 
 

Contact

Plus de 1000 utilisateurs ECOPOLY 2

More than 1000 ECOPOLY 2 users

 
 
 
 
 
 

Salon Equip Auto 2019

ECOPOLY 2 wood hot air generator

100 % made in France, folowing french manufacturing standards

ECOPOLY 2 Original : The real choice

  • A ventilated exchanger fairing guaranteeing compliance with regulatory radiation temperatures in France. No protective cage is required for regulation.
  • A large loading hatch 640x280 mm (ECP50.2) a,d 892x280mm (ECP100.2)
  • A grid of soil on all the surface in refractory stainless steel
  • A high pressure centrifugal fan
  • A flow, protection and flow rate regulator grille for the safety standard
  • A frame covered with high temperature epoxy paint baked
  • Controlled flap adjustement on the spool for balance and power adjustment in simultaneous action with the integrated draft key on the flue nozzle.
  • An electrical cabinet (optional) with electric safety control and adjustable hot air temperature thermostat.
  • A catalytic flammable smoke shield and heat exchanger protection
  • An overheated safety thermometer (optional) to visualize and control the flue gas température at maximum power.

ECOPOLY 2 is a trademark of AIRLAT. Visit the website www.airlat.com

 

 

Made in France

ECOPOLY 2 is the result of our customers requirements in term of essential needs, safety and regulation compliancy, as well as our long term technical developpments.
 
Do not hesitate to contact us for more information.
 

 

Wood burning heater for worshop 50 kW

Wood burning heater for worshop 100 kW

A wood heater but also a solution for eliminating waste

Damper

Allows to control the heating power by acting on the lever in modulating opening / closing
 
 

 

Brick fireplace

Post combustion effect and refund heat even when the power is reduced.

 

Ground grid

In 2 parts, the ground grid is refractory stainless steel AISI 430 made and covers the total area above the drawer.
 
 

 

 
 

Fame arrestor

Exchanger tubes protection from thermal overloads

 

Centrifugal fan

Hugh pressure fan, can be set up on the right side or on the left side of the ECOPOLY wood generator
 
 

Loading hatch

Dimensions 640x280mm for ECP50.2 and 892x280mm for ECP100.2.

 

Heat exchanger - Safety grid

High efficiency tubular construction. Delta of temperatire 40/45°C between suction and blowing side. Safety grid in compliancy with European regulation.
 
 

 

 
 

Ash drawer

Perforation and distribution slide front perforation and primary air distribution slide.

 

­

 

ECOPOLY 2

Polycombustible hot air generator with wood, carboard, chips...
A true bulky elimination solution.
Very cheap heat by recycling your bulky.
 

 

 

 

­